KT2 · A308 / A3 · 1 mi from Kingston
Norbiton Floor Sanding — Bringing Old Boards Back
A properly-sanded floor in Norbiton lasts 15+ years before its next sand — if it's finished right and maintained on a schedule. Ours are still going strong on floors we did in 2005. That's what we're aiming for on every new job.
From £34/m² · Full sand + 3-coat finish, all-inclusive. Colour matching and gap fill quoted separately.
Typical turnaround: 3–5 days for a typical room; larger open-plan spaces 5–7 days.
What's actually happening
The likely root causes in Norbiton's victorian villa homes and along A308 / A3:
- 1
Water damage requiring full sand and refinish after drying
- 2
Recoat intervals missed — floor deteriorated past the recoat window
- 3
Colour change (staining darker or lighter) as part of renovation
- 4
20+ years of foot traffic wearing through the original finish
- 5
Damage across a wide area — spot repairs no longer cost-effective
What you're seeing in Norbiton
Common signs we diagnose in KT2 wood floor sanding & refinishing calls:
- Uneven colour across the floor from patchy previous finishes
- New extension boards that need levelling with existing floor
- Paint or previous finish that needs removing completely
- Wood that has never been refinished and has aged with 30+ years of grime
- Multiple scratches, dents and stains that a recoat won't fix
Materials & method
Exactly what we use on Norbiton wood floor sanding & refinishing jobs — no vague "trade-quality" waffle.
- Lägler Hummel drum sander + Trio edger — industry-standard dust-extracted rigs
- Bona Traffic HD water-based lacquer, Osmo Polyx-Oil, Loba Impact Oil 2K — full finish range
- Bona Mix & Fill resin + your floor's own sawdust for period-correct gap fill
- Bona ColorFix and Osmo StainTint for pre-finish colour matching
Timeline: 3–5 days for a typical room; larger open-plan spaces 5–7 days. · Price: from £34/m² · Full sand + 3-coat finish, all-inclusive. Colour matching and gap fill quoted separately.
Our repair process in Norbiton
Step 1
Survey & sample
We inspect the floor, identify species, test-sand a small area to gauge condition below the finish, and show you finish samples on your actual wood. Written quote same day.
Step 2
Coarse sand
40-grit or 60-grit belt sand across the whole floor to remove old finish and level minor cupping. Edging with the same grit around the perimeter — this is where quality gets made or lost.
Step 3
Fill & progress grits
Fill gaps and defects if required (sawdust-resin, flexible fillet). Progress through 80 and 120 grit for a scratch-free surface ready for finish.
Step 4
Colour match & stain
If we're matching an existing area or changing colour, this is where stain and dye layers go on. Two coats minimum for tone-depth. Dry for 12 hours before the finish.
Step 5
Finish (2–3 coats)
Water-based lacquer (Bona Traffic HD), hardwax oil (Osmo Polyx), or two-pack (Loba 2K) — coats applied per manufacturer spec, with abrade between coats for adhesion.
Why Norbiton clients pick us
- 2-year workmanship guarantee plus manufacturer wear warranty
- Dust-extracted equipment as standard — not an upgrade
- 2-year workmanship guarantee plus manufacturer wear warranty
- Dust-extracted equipment as standard — not an upgrade
The straight answer for Norbiton
For victorian villa homes in Norbiton, sanding original boards is one of the highest-return investments. Compared to replacing with new engineered wood, you get more character, more longevity, and typically pay less. The maths favours the sand every time.
Wood Floor Sanding & Refinishing in Norbiton — common questions
- Can you match my floor to a new extension?
- Yes — we sand the existing and new together, colour-match with stain, and finish as one piece. The transition disappears. This is one of our most-requested jobs in new-build extensions in Norbiton.
- Will you fix squeaks and gaps as part of the sanding?
- Yes — repair work is often more efficient done in the same visit as sanding. We quote both together so you know the full cost before we start.
- Is dust-free sanding actually dust-free?
- 99.8% capture — not 100%. Fine dust still gets airborne, so we mask doorways and cover fitted furniture. Compared to non-extracted sanding, it's night and day. Your kitchen stays usable.
- How many times can a wood floor be sanded?
- A solid softwood original board: 5–7 times over its life. Solid hardwood: 6–8 times. Engineered with 4mm wear layer: 2–3 times. Recoating between sands extends the total floor life considerably.
- Do you cover Kingston and nearby postcodes?
- Yes — Norbiton (KT2) is on our regular Kingston route, about 1 miles from the town centre. Free sample-on-site during the quote visit.
- How long does sanding a floor take in Norbiton?
- 3–5 days for a typical room, 5–7 days for open-plan. Dust-extracted equipment means we can work faster without ruining your kitchen.
Bring your old Norbiton floor back
Sanded, stained, sealed. Character restored, finish upgraded.
Nearby KT areas we cover
Not all combinations are live yet — where a nearby link 404s, the same team still covers that area.