TN13 · A21 / M25 J5 · 0 mi from Sevenoaks
Sevenoaks Central Floor Sanding — Bringing Old Boards Back
A properly-sanded floor in Sevenoaks Central lasts 15+ years before its next sand — if it's finished right and maintained on a schedule. Ours are still going strong on floors we did in 2005. That's what we're aiming for on every new job.
From £34/m² · Full sand + 3-coat finish, all-inclusive. Colour matching and gap fill quoted separately.
Typical turnaround: 3–5 days for a typical room; larger open-plan spaces 5–7 days.
What's actually happening
The likely root causes in Sevenoaks Central's georgian townhouse homes and along A21 / M25 J5:
- 1
Colour change (staining darker or lighter) as part of renovation
- 2
20+ years of foot traffic wearing through the original finish
- 3
Damage across a wide area — spot repairs no longer cost-effective
- 4
New extension where existing floor needs to be blended in
- 5
Old paint or shellac finish that has to be fully stripped
What you're seeing in Sevenoaks Central
Common signs we diagnose in TN13 wood floor sanding & refinishing calls:
- Paint or previous finish that needs removing completely
- Wood that has never been refinished and has aged with 30+ years of grime
- Multiple scratches, dents and stains that a recoat won't fix
- Cupped or crowned boards that need sanding flat
- Old finish is worn through to bare wood in traffic areas
Materials & method
Exactly what we use on Sevenoaks Central wood floor sanding & refinishing jobs — no vague "trade-quality" waffle.
- Lägler Hummel drum sander + Trio edger — industry-standard dust-extracted rigs
- Bona Traffic HD water-based lacquer, Osmo Polyx-Oil, Loba Impact Oil 2K — full finish range
- Bona Mix & Fill resin + your floor's own sawdust for period-correct gap fill
- Bona ColorFix and Osmo StainTint for pre-finish colour matching
Timeline: 3–5 days for a typical room; larger open-plan spaces 5–7 days. · Price: from £34/m² · Full sand + 3-coat finish, all-inclusive. Colour matching and gap fill quoted separately.
Our repair process in Sevenoaks Central
Step 1
Survey & sample
We inspect the floor, identify species, test-sand a small area to gauge condition below the finish, and show you finish samples on your actual wood. Written quote same day.
Step 2
Coarse sand
40-grit or 60-grit belt sand across the whole floor to remove old finish and level minor cupping. Edging with the same grit around the perimeter — this is where quality gets made or lost.
Step 3
Fill & progress grits
Fill gaps and defects if required (sawdust-resin, flexible fillet). Progress through 80 and 120 grit for a scratch-free surface ready for finish.
Step 4
Colour match & stain
If we're matching an existing area or changing colour, this is where stain and dye layers go on. Two coats minimum for tone-depth. Dry for 12 hours before the finish.
Step 5
Finish (2–3 coats)
Water-based lacquer (Bona Traffic HD), hardwax oil (Osmo Polyx), or two-pack (Loba 2K) — coats applied per manufacturer spec, with abrade between coats for adhesion.
Why Sevenoaks Central clients pick us
- 2-year workmanship guarantee plus manufacturer wear warranty
- Dust-extracted equipment as standard — not an upgrade
- 2-year workmanship guarantee plus manufacturer wear warranty
- Dust-extracted equipment as standard — not an upgrade
The straight answer for Sevenoaks Central
The finish choice matters as much as the sanding. In Sevenoaks Central we walk through options with samples on your actual floor — because a satin hardwax oil looks completely different to a matt water-based lacquer, and we want you sure of your choice.
Wood Floor Sanding & Refinishing in Sevenoaks Central — common questions
- Is dust-free sanding actually dust-free?
- 99.8% capture — not 100%. Fine dust still gets airborne, so we mask doorways and cover fitted furniture. Compared to non-extracted sanding, it's night and day. Your kitchen stays usable.
- How many times can a wood floor be sanded?
- A solid softwood original board: 5–7 times over its life. Solid hardwood: 6–8 times. Engineered with 4mm wear layer: 2–3 times. Recoating between sands extends the total floor life considerably.
- Do you cover Sevenoaks and nearby postcodes?
- Yes — Sevenoaks Central (TN13) is on our regular Sevenoaks route, about 0 miles from the town centre. Free sample-on-site during the quote visit.
- How long does sanding a floor take in Sevenoaks Central?
- 3–5 days for a typical room, 5–7 days for open-plan. Dust-extracted equipment means we can work faster without ruining your kitchen.
- Can you sand engineered wood floors too?
- Only if the wear layer is 4mm or more. Anything thinner and there's not enough material to sand safely. We check on the survey before quoting.
- Do I have to leave the house during sanding?
- No — we work around you. Dust-extraction plus doorway masking means most of the house stays usable. We plan the schedule so bedrooms are done separately from living areas.
Ready to see your floor's true colour?
48-hour written quote, Sevenoaks Central covered weekly.
Nearby TN areas we cover
Not all combinations are live yet — where a nearby link 404s, the same team still covers that area.