CM17 · M11 J7 · 22 mi from central London · Bedroom Flooring
Old Harlow Bedroom Herringbone & Parquet Flooring, CM17
Bedrooms have different flooring priorities from every other room in a Old Harlow home — you're on it barefoot at 6am, and any acoustic bleed to the room below matters more here than anywhere else. On Old Harlow bedroom jobs we spec Herringbone & Parquet Flooring on a dense acoustic underlay rated for impact sound (IIC 60+), and default to hardwax oiled finishes for barefoot warmth.
Underlay choice for Old Harlow bedroom Herringbone & Parquet Flooring
Bedroom underlay in Old Harlow homes is where the acoustic maths gets serious. We spec 3–5mm dense rubber-crumb or wool-fibre underlay on every bedroom floor over a habitable room — reduces impact transfer by 18–24dB compared to standard foam.
Why Old Harlow clients book us for bedroom flooring
- Direction of run planned to bed placement on every survey
- Fitted-wardrobe scribing handled by our own crew
- Direction of run planned to bed placement on every survey
- Fitted-wardrobe scribing handled by our own crew
Bedroom finishes for Old Harlow homes
Colour choice in Old Harlow bedrooms should lean warm mid-tone: raw white oaks read cold in low morning light; dark stains read heavy. Our most-fitted bedroom colours in Old Harlow are a natural brushed oak and a smoked warm-mid.
Local context
Historic village pre-dating the 1947 new town
Nearest station
Harlow Mill
Laying pattern for Old Harlow bedroom floors
For master bedrooms we always ask about bed placement on the survey before we set direction. Boards fit around the bed forever; the bed can move next month. Plan the boards to the bed, not vice versa.
Bedroom Flooring in Old Harlow — questions
- How do I reduce sound transfer through a Old Harlow bedroom floor?
- Dense acoustic underlay (3–5mm rubber-crumb or wool-fibre) as a minimum. For Old Harlow flats and conversions we add a floating acoustic mat below the underlay — drops impact sound by 22–28dB total.
- How long is my bedroom out of use during a Old Harlow fit?
- 48 hours from start to walk-on for a typical Old Harlow bedroom, plus 5 days for full-cure oil before rugs and heavy furniture.
- How do the boards handle a bed with castors in Old Harlow?
- Fine, if the castors are wide-face plastic or covered. Narrow-face steel castors on a heavy divan will dent any wood finish — we recommend felt saucers under each leg.
- Is Herringbone & Parquet Flooring too cold for a Old Harlow bedroom?
- Not with a hardwax oil finish and the right underlay. Oiled finishes on Old Harlow bedroom Herringbone & Parquet Flooring feel warmer than carpet in most measurements — surface hardness aside, the perceived temperature comes from the finish, not the material.
- What board width suits a Old Harlow bedroom?
- Bedroom Herringbone & Parquet Flooring in Old Harlow usually sits at 140–190mm — narrower than a lounge because bedrooms are smaller on average. Wide boards in a small period bedroom read out of proportion.
- Is engineered wood suitable for a Old Harlow bedroom?
- Yes — engineered wood in a Old Harlow bedroom is fine on any subfloor, works over UFH, and can be re-oiled without full sanding. It's our most-fitted bedroom material in CM17.
Bedroom flooring quote for Old Harlow
48-hour written quote, warmth-oil finish default, acoustic underlay included.
Bedrooms in Old Harlow are 50% acoustic performance, 50% finish warmth. Get both right and the floor is the quietest, warmest surface in the house.