BN3 · A259 / A27 · 47 mi from central London · Kitchen Flooring
Hard-Wearing Kitchen Herringbone & Parquet Flooring in Hove
In Hove kitchens we most often fit Herringbone & Parquet Flooring in mid-widths (140–180mm) — narrow enough to feel proportionate against typical regency townhouse room sizes, wide enough not to read like a strip floor. Every board goes down over a moisture-tested subfloor, and expansion is set to the appliance line, not the wall.
Kitchen wear — the three things that kill a floor
In BN3 homes the biggest failure we replace is glue-down floors near dishwashers where the installer skipped a silicone bead. On our kitchens the appliance perimeter is sealed as a standard step, not an upsell.
Kitchen-grade Herringbone & Parquet Flooring in Hove
For Hove kitchens we default to Engineered oak herringbone 600×120mm in a Smoked & oiled finish — the surface hardness and the coating are both rated for wet-area residential use. Board width sits at 140–180mm on typical regency townhouse kitchen footprints.
Local context
Brunswick Square Regency conservation area
Nearest station
Hove
Why Hove clients book us for kitchen flooring
- 10-year workmanship warranty on the fit, manufacturer warranty on the material
- Water-damage callback rate under 0.5% across 12 years of kitchen installs
- 10-year workmanship warranty on the fit, manufacturer warranty on the material
- Water-damage callback rate under 0.5% across 12 years of kitchen installs
Underfloor heating & kitchen extensions in Hove
On Hove (BN3) kitchens with UFH we glue the floor directly to a screed rather than float it — better heat transfer, no drum sound underfoot. Adds roughly £8–£12/m² over a floated build-up but eliminates the two most common UFH complaints.
Kitchen Flooring in Hove — questions
- Do you have to remove the kitchen units to re-floor in Hove?
- No — we fit up to the unit plinth line and use colour-matched beading. Only jobs where the units are being replaced anyway get a full floor-under-cabinets install.
- Are there kitchen floors that suit dogs / kids in Hove?
- For high-abuse Hove kitchens we spec commercial-grade engineered oak or 6.5mm LVT. Both handle claws, spills and thrown Lego without permanent damage.
- Can Herringbone & Parquet Flooring really handle a working kitchen in Hove?
- Yes, with the right finish grade, a sealed appliance perimeter and a moisture-tested subfloor. In Hove we've been fitting kitchen Herringbone & Parquet Flooring on this spec for over a decade with zero failure claims on that build-up.
- How long does a kitchen re-floor take in Hove?
- 3–5 working days for a typical Hove kitchen (removal, prep, fit, silicone seal, cure). Longer if we're re-doing the subfloor or if UFH commissioning is part of the job.
- What's the best board width for a Hove kitchen?
- Kitchens in regency townhouse Hove homes work best at 140–180mm. Wider boards read visually flat in narrow galley kitchens; narrower boards look busy against gloss cabinet fronts.
- Does the kitchen need to be out of use during the fit in Hove?
- Yes, for the fit day and 24 hours cure. We can work around a fitted kitchen; you just lose kitchen use for 2 nights.
Kitchen Herringbone & Parquet Flooring in Hove — done properly
Own crew, moisture-tested, 10-year workmanship warranty.
Kitchens in Hove (BN3) don't need premium marketing — they need a proper build-up. That's what we quote for, and that's what we fit.