KT2 · A308 · 12 mi from central London · Kitchen Flooring
Kitchen Luxury Vinyl Flooring (LVT & SPC) — Canbury, KT2
Around Kingston we quote roughly one kitchen a week in Luxury Vinyl Flooring (LVT & SPC). The mistakes we see on other quotes are always the same: no DPM under a screed, wrong underlay near dishwashers, and beading that stops water leaving after a leak. Here's how we build a kitchen floor in Canbury that lasts.
What we specify for Canbury (KT2) kitchen jobs
Not every Luxury Vinyl Flooring (LVT & SPC) range is kitchen-suitable. On Canbury projects we skip anything with a raw-oil finish or a bevel deeper than 1.5mm — both trap water at the joint.
Local context
Edwardian river-side terraces
Nearest station
Kingston
What kitchen flooring actually needs to survive
Every Canbury kitchen we survey gets checked for subfloor moisture (must be <2% CM for wood, <4% for LVT), appliance layout, and dishwasher / washing-machine risk zones. We route the expansion joint into the layout, not against a wall.
Why Canbury clients book us for kitchen flooring
- Own certified fitters — no rotating subcontractors on your Canbury kitchen
- Silicone-sealed appliance perimeter fitted as standard on every Canbury kitchen
- Own certified fitters — no rotating subcontractors on your Canbury kitchen
- Silicone-sealed appliance perimeter fitted as standard on every Canbury kitchen
Getting UFH right on a Canbury kitchen project
Most Canbury kitchen extensions built after 2015 run wet UFH. That rules out solid timber and demands a specific engineered build-up — thermally conductive underlay, boards under 20mm, and a slow acclimatisation cycle before the heating goes on.
Kitchen Flooring in Canbury — questions
- Can Luxury Vinyl Flooring (LVT & SPC) really handle a working kitchen in Canbury?
- Yes, with the right finish grade, a sealed appliance perimeter and a moisture-tested subfloor. In Canbury we've been fitting kitchen Luxury Vinyl Flooring (LVT & SPC) on this spec for over a decade with zero failure claims on that build-up.
- How long does a kitchen re-floor take in Canbury?
- 3–5 working days for a typical Canbury kitchen (removal, prep, fit, silicone seal, cure). Longer if we're re-doing the subfloor or if UFH commissioning is part of the job.
- What's the best board width for a Canbury kitchen?
- Kitchens in edwardian terrace Canbury homes work best at 140–180mm. Wider boards read visually flat in narrow galley kitchens; narrower boards look busy against gloss cabinet fronts.
- Does the kitchen need to be out of use during the fit in Canbury?
- Yes, for the fit day and 24 hours cure. We can work around a fitted kitchen; you just lose kitchen use for 2 nights.
- Is LVT better than engineered wood for a Canbury kitchen?
- Neither is universally better. LVT is fully waterproof, quieter, and 30% cheaper. Engineered wood adds warmth and resale value in edwardian terrace homes. For rental Canbury kitchens LVT usually wins; for owner-occupied we lean engineered.
- Can Luxury Vinyl Flooring (LVT & SPC) go over existing kitchen tiles in Canbury?
- Yes, if the tiles are firmly bonded and level. We check with a straightedge and a moisture meter on the survey. If either fails, tiles come up.
Book a free kitchen flooring survey in Canbury
We'll measure, moisture-test and price your Canbury kitchen floor properly.
Every Canbury kitchen we fit gets the same build-up we'd want in our own home: moisture-tested, sealed at every risk point, warrantied for a decade.