RH11 · A264 / M23 J11 · 31 mi from central London · Kitchen Flooring
Kitchen Luxury Vinyl Flooring (LVT & SPC) — Kilnwood Vale, RH11
Around Crawley we quote roughly one kitchen a week in Luxury Vinyl Flooring (LVT & SPC). The mistakes we see on other quotes are always the same: no DPM under a screed, wrong underlay near dishwashers, and beading that stops water leaving after a leak. Here's how we build a kitchen floor in Kilnwood Vale that lasts.
Kitchen-grade Luxury Vinyl Flooring (LVT & SPC) in Kilnwood Vale
For Kilnwood Vale kitchens we default to Karndean Da Vinci in a Wood-effect plank finish — the surface hardness and the coating are both rated for wet-area residential use. Board width sits at 140–180mm on typical new build kitchen footprints.
Local context
Large 2,500-home new build on the Crawley/Horsham border
Nearest station
Faygate
Kitchen wear — the three things that kill a floor
In RH11 homes the biggest failure we replace is glue-down floors near dishwashers where the installer skipped a silicone bead. On our kitchens the appliance perimeter is sealed as a standard step, not an upsell.
Why Kilnwood Vale clients book us for kitchen flooring
- 10-year workmanship warranty on the fit, manufacturer warranty on the material
- Water-damage callback rate under 0.5% across 12 years of kitchen installs
- 10-year workmanship warranty on the fit, manufacturer warranty on the material
- Water-damage callback rate under 0.5% across 12 years of kitchen installs
Underfloor heating & kitchen extensions in Kilnwood Vale
On Kilnwood Vale (RH11) kitchens with UFH we glue the floor directly to a screed rather than float it — better heat transfer, no drum sound underfoot. Adds roughly £8–£12/m² over a floated build-up but eliminates the two most common UFH complaints.
Kitchen Flooring in Kilnwood Vale — questions
- What's the best board width for a Kilnwood Vale kitchen?
- Kitchens in new build Kilnwood Vale homes work best at 140–180mm. Wider boards read visually flat in narrow galley kitchens; narrower boards look busy against gloss cabinet fronts.
- Does the kitchen need to be out of use during the fit in Kilnwood Vale?
- Yes, for the fit day and 24 hours cure. We can work around a fitted kitchen; you just lose kitchen use for 2 nights.
- Is LVT better than engineered wood for a Kilnwood Vale kitchen?
- Neither is universally better. LVT is fully waterproof, quieter, and 30% cheaper. Engineered wood adds warmth and resale value in new build homes. For rental Kilnwood Vale kitchens LVT usually wins; for owner-occupied we lean engineered.
- Can Luxury Vinyl Flooring (LVT & SPC) go over existing kitchen tiles in Kilnwood Vale?
- Yes, if the tiles are firmly bonded and level. We check with a straightedge and a moisture meter on the survey. If either fails, tiles come up.
- How much does a kitchen re-floor cost in Kilnwood Vale?
- Typical Kilnwood Vale kitchens (12–18m²) come in at £1,850–£3,400 in engineered oak fitted, or £1,150–£2,100 in click LVT. Both include prep, underlay and appliance perimeter seal.
- What happens if my dishwasher leaks onto a Luxury Vinyl Flooring (LVT & SPC) kitchen floor in Kilnwood Vale?
- With our silicone-sealed appliance perimeter, a slow leak stays on the appliance side and dries without wicking under the boards. Fast catastrophic floods still need lifting locally — but boards can be replaced without a full re-lay.
Book a free kitchen flooring survey in Kilnwood Vale
We'll measure, moisture-test and price your Kilnwood Vale kitchen floor properly.
Every Kilnwood Vale kitchen we fit gets the same build-up we'd want in our own home: moisture-tested, sealed at every risk point, warrantied for a decade.