BR5 · A208 / A20 · 12 mi from central London · Kitchen Flooring
Hard-Wearing Kitchen Luxury Vinyl Flooring (LVT & SPC) in Petts Wood
In Petts Wood kitchens we most often fit Luxury Vinyl Flooring (LVT & SPC) in mid-widths (140–180mm) — narrow enough to feel proportionate against typical 1930s semi room sizes, wide enough not to read like a strip floor. Every board goes down over a moisture-tested subfloor, and expansion is set to the appliance line, not the wall.

What kitchen flooring actually needs to survive
Every Petts Wood kitchen we survey gets checked for subfloor moisture (must be <2% CM for wood, <4% for LVT), appliance layout, and dishwasher / washing-machine risk zones. We route the expansion joint into the layout, not against a wall.
What we specify for Petts Wood (BR5) kitchen jobs
Not every Luxury Vinyl Flooring (LVT & SPC) range is kitchen-suitable. On Petts Wood projects we skip anything with a raw-oil finish or a bevel deeper than 1.5mm — both trap water at the joint.
Local context
Picturesque 1930s planned suburb
Nearest station
Petts Wood
Why Petts Wood clients book us for kitchen flooring
- Own certified fitters — no rotating subcontractors on your Petts Wood kitchen
- Silicone-sealed appliance perimeter fitted as standard on every Petts Wood kitchen
- Own certified fitters — no rotating subcontractors on your Petts Wood kitchen
- Silicone-sealed appliance perimeter fitted as standard on every Petts Wood kitchen
Getting UFH right on a Petts Wood kitchen project
Most Petts Wood kitchen extensions built after 2015 run wet UFH. That rules out solid timber and demands a specific engineered build-up — thermally conductive underlay, boards under 20mm, and a slow acclimatisation cycle before the heating goes on.
Kitchen Flooring in Petts Wood — questions
- Is LVT better than engineered wood for a Petts Wood kitchen?
- Neither is universally better. LVT is fully waterproof, quieter, and 30% cheaper. Engineered wood adds warmth and resale value in 1930s semi homes. For rental Petts Wood kitchens LVT usually wins; for owner-occupied we lean engineered.
- Can Luxury Vinyl Flooring (LVT & SPC) go over existing kitchen tiles in Petts Wood?
- Yes, if the tiles are firmly bonded and level. We check with a straightedge and a moisture meter on the survey. If either fails, tiles come up.
- How much does a kitchen re-floor cost in Petts Wood?
- Typical Petts Wood kitchens (12–18m²) come in at £1,850–£3,400 in engineered oak fitted, or £1,150–£2,100 in click LVT. Both include prep, underlay and appliance perimeter seal.
- What happens if my dishwasher leaks onto a Luxury Vinyl Flooring (LVT & SPC) kitchen floor in Petts Wood?
- With our silicone-sealed appliance perimeter, a slow leak stays on the appliance side and dries without wicking under the boards. Fast catastrophic floods still need lifting locally — but boards can be replaced without a full re-lay.
- Do you have to remove the kitchen units to re-floor in Petts Wood?
- No — we fit up to the unit plinth line and use colour-matched beading. Only jobs where the units are being replaced anyway get a full floor-under-cabinets install.
- Are there kitchen floors that suit dogs / kids in Petts Wood?
- For high-abuse Petts Wood kitchens we spec commercial-grade engineered oak or 6.5mm LVT. Both handle claws, spills and thrown Lego without permanent damage.
Kitchen Luxury Vinyl Flooring (LVT & SPC) in Petts Wood — done properly
Own crew, moisture-tested, 10-year workmanship warranty.
Kitchens in Petts Wood (BR5) don't need premium marketing — they need a proper build-up. That's what we quote for, and that's what we fit.