BR5 · A208 / A20 · 12 mi from central London · Living Room Flooring
Herringbone & Parquet Flooring for Living Rooms in Petts Wood
In Petts Wood (BR5) we quote a lot of open-plan lounges — Victorian rear-reception knock-throughs, 1930s bay-fronted front rooms, new-build family rooms. Each needs a different board width and direction of run. Front rooms with bays take narrower boards; deep rear reception rooms take 200mm+.
Why Petts Wood clients book us for living room flooring
- Direction of run planned to the primary light source on every Petts Wood lounge
- Furniture moves included on standard Petts Wood living-room installs
- Direction of run planned to the primary light source on every Petts Wood lounge
- Furniture moves included on standard Petts Wood living-room installs
The Herringbone & Parquet Flooring spec that suits Petts Wood lounges
In 1930s semi Petts Wood homes we'll adjust: bay-fronted rooms take 160–180mm, open-plan rear reception rooms take 200–220mm. Board length matters too — a lounge under 4m benefits from 1.8m+ board length so the eye reads plank, not tile.
Getting board direction right in Petts Wood lounges
Open-plan Petts Wood lounges get one continuous direction across the whole footprint — no changing angles between old and new sections. This is a hard rule on our jobs; breaking it always looks retrofitted.
Local context
Picturesque 1930s planned suburb
Nearest station
Petts Wood
Sofa, rugs and dents — the Petts Wood lounge maintenance brief
The two things that damage Petts Wood lounge floors are metal castors and unshod chair feet. Every Petts Wood lounge we finish gets felt-pad guidance in the handover pack, and we price protection on request.
Living Room Flooring in Petts Wood — questions
- What finish suits a family living room in Petts Wood?
- Matte hardwax oil is the family-lounge default in Petts Wood — hides scuffs, re-coats without a full sand, and warms visually. Reserve lacquer for lower-traffic or period restoration jobs.
- Do you move furniture on a Petts Wood living room fit?
- Yes — light furniture moves included on the day. Full-house moves and storage are quoted separately; typically £180–£380 for a fully-furnished Petts Wood lounge.
- How much for a lounge re-floor in Petts Wood?
- A typical Petts Wood lounge (20–30m²) in engineered oak fitted: £2,200–£4,800. In solid oak: £3,000–£6,200. In herringbone parquet: £2,800–£5,600. All including prep and finish.
- Can I fit a wood floor over concrete in a Petts Wood lounge?
- Yes — with a DPM (damp-proof membrane) and a moisture-tested reading below 4%. We measure on the survey before we quote in every Petts Wood project.
- How long is a Petts Wood living room fit typically?
- 3–4 working days for a 20–30m² lounge including subfloor prep, floor fit, scotia and clean. Add 48 hours for a full-cure hardwax oil before rugs and furniture.
- Is engineered wood as good as solid wood in a lounge?
- For most Petts Wood lounges — yes, and often better. Engineered handles wider boards, sits over UFH, and moves less with humidity. Solid wins only where the room already has period solid wood.
Speak to a Petts Wood living room floor specialist
Direct advice on board width, colour and direction of run.
Living room floors in Petts Wood (BR5) are the room the guest sees first — spec, direction and finish should all reflect that.